Table of Contents
Advertisement
4.2 Modes of Operation
4.2.1 Contingent Mode
DEFAULT SETTINGS
SETUP
VOLUME
(default = Medium)
DURATION
(default = 10 sec)
THRESHOLD
Threshold
(default = 4)
# OF SUCKS
(default = 1)
© 2023 by NeoLight LLC.
All rights reserved.
•
•
•
•
1. Insert the PAL Sensor with the Soothie
SCREEN DISPLAY
low
2. Turn the device ON with the POWER button
Medium
high
3. Display will read CONTINGENT (default
10
4. VOLUME will be highlighted. Default is
20
30
40
1
2
5. DURATION will be highlighted. The default
3
4
5
6
7
8
6. THRESHOLD will be highlighted. Default is 4.
9
9 10
1
2
3
7. # OF SUCKS will be highlighted. Default is 1.
4
5
8. When Setup is complete, user must navigate
TERMINOLOGY
Volume - Settings are LOW, MEDIUM and
HIGH: The maximum level being 65dB in scale
C (+/- 3dB).
Duration - This is the length of time the music
is set to play; it is displayed in seconds for
contingent mode (in minutes for non-
contingent mode).
Threshold – This is the sucking strength that is
required to activate the music.
# Of Sucks - The number of times the infant
must suck on the pacifier at the required
threshold to activate the music.
INSTRUCTIONS FOR USE
Pacifier (Phillips Soothie / NICU Soothie /
Wee Soothie / Super Soothie)
setting), press SELECT.
medium. To change: Press SELECT, scroll with
UP/DOWN arrows. When choice is
highlighted, press SELECT again.
setting is 10. To change: Press SELECT, scroll
to desired time with UP/DOWN arrows.
When choice is highlighted, press SELECT
again.
To change: Press SELECT, scroll with
UP/DOWN arrows. When choice is
highlighted, press SELECT again.
To change: Press SELECT, scroll with
UP/DOWN arrows. When choice is
highlighted, press SELECT again.
to EXIT TO BEGIN. Press SELECT and PAL
Page 14 of 30
500055 Rev E
Advertisement
Table of Contents
