Dell Pro WL5024 User Manual page 16

Behavior when running Microsoft Teams application
During Teams call
Evoke/Open Teams
notification
Answer a Teams call
End a Teams call
Reject a Teams call
Raise hand during
Teams call
NOTE: If the boom microphone is rotated up, the mute button will
not unmute the microphone.
NOTE: ANC is an Augmented Hearing experience, and hence the
effect is depending on the environment noise, type of music being
played, sensitivity of user hearing and other factors potentially
effecting its performance. It is recommended for user to make
sure headset is being worn at the correct position to ensure good
earcup sealing, minimize potential leakages of external noise into
the ear to have a good ANC effect.
15
Action Button
Single press on the
Teams button
Single press on the
Call control button
Double press on the
Call control button
Long press on the
Call control button
for 2 seconds
Long press on the
Teams button
LED Behavior
- Busy light turns red.
USB-C Wireless
-
Audio Receiver
LED
blinks purple.
- Busy light blinks red
when receiving a
Teams call and turns
red during the call.
- Busy light turns off
when a Teams call
ends.
- USB-C Wireless
Audio Receiver LED
displays purple light.
- Busy light remains
red during a Teams
call.
USB-C Wireless
-
Audio Receiver
LED
displays purple light.
- Busy light remains
red during Teams call.
Voice Prompt
Teams voice prompt
when receiving a
Teams notification.
Teams voice prompt
when receiving an
incoming call.