Adjust The Headband; Position The Boom - Dell Pro WL5024 User Manual

Wireless anc headset
Table of Contents

Advertisement

Adjust the headband

Lengthen or shorten the band until it fits comfortably. The ear cup can be adjusted to +90
degrees and -20 degrees at most. The cushions should sit comfortably over the center of
your ears.

Position the boom

The discrete boom microphone should be worn on left side. Flip the boom mic arm down to
unmute and flip up to mute. You hear voice commands mic unmute and mic mute, that
indicate the status of the mic. The headset auto mutes or unmutes when the boom mic is
flipped down 100 degrees or over, the full deployment angle is 130 degrees. You are unable
to mute or unmute when the boom mic is not flipped down.
CAUTION: To avoid breaking the boom microphone, do not rotate
over ±130°.
NOTE: You experience the sidetone effect when you rub or
scratch the microphone during a call. You can select your
preferred sidetone level or disable it in DPeM.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs2404Ud2403

Table of Contents