Temperature Controls; Power Saving Control - KitchenAid Superba KSRS22Q Use And Care Manual

Using ike Rejrigeraior-Freezer
Temperature Controls
Refrigerato
off
1 2 A 3 4 colder
Refrigerator control
Freezer
cold 1 2 A 3 4 colder
Freezer control
Controls for the refrigerator and
freezer are in the refrigerator.
When the refrigerator is first
plugged in:
1. Move the Refrigerator Control to
the triangle marking between
numbers 2 and 3.
2. Move the Freezer Control to the
triangle marking between
numbers 2 and 3.
These settings should be about
right for normal household
refrigerator usage.
Give the refrigerator time to cool
down completely before adding
food. (This may take several hours.)
The controls will be set about right
when milk or juice is as cold as you
like and when ice cream is firm.
To change the temperature
setting, follow the steps given
below:
1. Adjust the Refrigerator Control
first.
2. Wait at least 24 hours before
making further adjustments. This
gives the refrigerator and/or
freezer time to reach set
temperature.
3. Adjust the Freezer Control, if
necessary.
To make the refrigerator or freezer
colder, slide the control(s) toward
the number 4 setting(s). To make
the refrigerator or freezer less cold,
slide the control(s) toward the
number 1 settlng(s).
Changing either the Refrigerator
Control or Freezer Control will affect
the temperature of both
compartments.
Use the settings listed in the chart
below as a guideline when
adjusting temperature controls:
CONDITION
RECOMMENDED
CONTROL SETTING
ADJUSTMENTS:
If refrigerator Refrigerator 3
section is too warm. Freezer 2
If freezer section is Refrigerator 3
too warm. Freezer 3
If refrigerator Refrigerator
2
section is too cold. Freezer
3
If ice isn't made fast
Refrigerator 3
enough. Freezer 3
If both sections are Refrigerator 3
too warm. Freezer 3
The following reasons can cause
the conditions listed above:
• Door opened often.
• Large amount of food added.
• Room temperature too warm.
• Room temperature too cold.
(Refrigerator doesn't cycle often
enough.)
• Controls not set correctly for your
conditions.
• Heavy ice usage.
Power Saving Control
reduces
exterior
moisture
uses
less
energy
The
POWER SAVING CONTROL
on the Control Console operates
electric heaters around the door
openings. These heaters help keep
moisture from forming on the
outside of the refrigerator.
1. Use the
uses less energy
setting
when humidity is low (indicator
light off).
2. Use the
reduces exterior
moisture
setting only if moisture
forms on the outside of the
refrigerator (indicator light on).
7