Changing The Light Bulbs - KitchenAid Superba KSRS22Q Use And Care Manual

Changing the Light Bulbs
Awarning
Electrical Shock Hazard
Before removing a light
bulb, either unplug the
refrigerator or disconnect
the electricity leading to the
refrigerator at the main
power supply. Shock and
injury can occur if electricity
remains connected.
To change light bulb in
1. Disconnect refrigerator from
power supply.
2. Reach behind the Control
Console to find bulb.
3. Remove and replace bulb with a
40-watt tubular appliance bulb.
4. Reconnect power supply.
To change light bulb behind
crisper:
1. Disconnect refrigerator from
power supply.
2. Remove crisper and crisper
cover. (See page 9.)
3. Remove and replace bulb with a
40-watt appliance bulb.
4. Reconnect power supply.
To change light above Fast
Freeze Shelf:
1. Disconnect refrigerator from
power supply.
2. Remove light shield by pulling
top forward.
3. Remove and replace bulb with a
40-watt appliance bulb.
4. Replace the light shield.
5. Reconnect power supply.
To change light below ice bin:
1. Disconnect refrigerator from
power supply.
2. Push in sides of light shield until
it snaps free.
3. Remove and replace bulb with a
40-watt appliance bulb.
4. Replace the light shield.
5. Reconnect power supply.
To change dispenser light:
1. Disconnect refrigerator from
power supply.
2. Remove the bulb from the top
inside of the dispenser area.
3. Replace with a heavy-duty
10-watt bulb.
4. Reconnect power supply.