Total Pump-Out At The End Of The Day; Maintenance And Cleaning; Daily Cleaning - Smeg CWC600 Manual

TOTAL PUMP-OUT AT THE END OF THE DAY

The dishwasher is able to perform an automatic cleaning cycle at the end of the day.
After a total pump-out the filters should be cleaned as described above.
Never switch the dishwasher off with water in the tank; pump out first.
Although no particular scheduled maintenance is required, users are advised to have the dishwasher checked by a
specialist technician twice a year.
N.B.: the manufacturer accepts no liability for wilful damage or damage deriving from carelessness, neglect, failure
to comply with instructions, regulations and standards or incorrect connections.

11.1 Daily cleaning

The dishwasher has IPX4 protection, but the use of direct water jets for cleaning is forbidden.
Cleaning the filter during the day
In case of particularly heavy-duty working conditions, the filter should be cleaned every 30-40 cycles, keeping the
machine in operating conditions; to do this, carry out the "partial tank pump-out" routine (program "P0").
17

11 MAINTENANCE AND CLEANING

Press the button; "UnLo" and the duration appear
on the display.
Confirm by pressing
At the end of the pump-out, the appliance sets in
"OFF" status.
Press the button, and hold it down, until "P0" and
the duration of 1' appear on the display.
Confirm by pressing
At the end of the pump-out the word "End" flashes on
the display. The display returns to showing "P1". Close
the door again to start filling the tank prior to
performance of a new wash cycle.
; light L2 turns orange.
; light L2 turns orange.