Included In Delivery; Signs And Symbols; Warnings And Safety Notes - Beurer LB 37 Instructions For Use Manual

Table of contents
1. Included in delivery .................................................. 12
2. Signs and symbols ................................................... 12
3. Warnings and safety notes ....................................... 12
4. Intended use ............................................................. 13
5. Device description .................................................... 14
6. Initial use .................................................................. 14
7. Usage ....................................................................... 15

1. INCLUDED IN DELIVERY

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present. Before
use, ensure that there is no visible damage to the device or accessories and that all packaging material has been remo-
ved. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.
• Base unit for air humidifier
• Water tank for air humidifier
• Cleaning brush
• Instructions for use
• 15 Aroma pads

2. SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for
the device:
WARNING
Warning instruction indicating a risk of injury or
damage to health
IMPORTANT
Safety note indicating possible damage to the
device/accessory
Product information
Note on important information
Read the instructions
Disposal in accordance with the Waste Elec-
trical and Electronic Equipment EC Directive
- WEEE
Separate the product and packaging elements
and dispose of them in accordance with local
regulations.
water tank, periodical cleaning

3. WARNINGS AND SAFETY NOTES

Read these instructions for use carefully. Non-observance of the following information may result in personal injury or
material damage. Store these instructions for use and make them accessible to all users. Make sure to include these
instructions for use when handing over the device to third parties.
8. Cleaning and maintenance ..................................... 16
9. Accessories and replacement parts ....................... 17
10. What if there are problems? ................................... 18
11. Disposal .................................................................. 18
12. Technical specifications ......................................... 18
13. Warranty / Service .................................................. 19
Manufacturer
CE labelling
This product satisfies the requirements of the
applicable European and national directives.
Marking to identify the packaging material.
B
A = Material code, B = Material number:
1-7 = Plastics, 20-22 = Paper and cardboard
A
The products demonstrably meet the requi-
rements of the Technical Regulations of the
EAEU.
United Kingdom Conformity Assessed Mark
Separate the packaging elements and dispose
of them in accordance with local regulations.
Importer symbol
12