Table of Contents
Advertisement
(D REMOTE CONTROL cable connectors
These connectors are used to connect compatible YAMAHA
components (with an === mark) to your amplifier for remote control of
each component. The cables for each component are supplied with this
unit.
PHONO — Connect to a turntable using the cable with mini-plug
connectors.
TUNER — Connect to a tuner using the cable with 5-pin connectors.
TAPE — Connect to a cassette tape deck using the cable with 6-pin
connectors.
(2) Video signal jacks
These jacks are used to connect the video signal cables from your
components to the amplifier. They should be connected to the proper
input/output jacks for each unit.
CDV — Connect to a CD Video player.
CDV/LV — Connect to a CD Video player or to a Laservision player.
TV -- Connect to a TV tuner.
VCR 1 —- Connect to a Video Cassette Recorder for both recording and
playback.
VCR 2 — Connect to a second Video Cassette Recorder for both -
recor ding and playback.
MONITOR OUT 1 — Connect to the video IN terminal on a video
monitor.
MONITOR OUT 2 — Connect to the video IN terminal on a second
video monitor.
e S VIDEO connectors
* With the S VIDEO connections, a high resolution picture will be
obtained, resulting in much clearer reproduction.
S VIDEO VCR 1 connectors — Connect to a Video Cassette Recorder
that has S connectors for both recording and playback.
S VIDEO VCR 2 connectors — Connect to a second Video Cassette
Recorder that has S connectors for both recording and playback.
S VIDEO MONITOR connector — Connect to the S input connector on
a video monitor.
(8 AC OUTLETS
These outlets are used to connect the power cords from your
components to the amplifier.
|
The power to the UNSWITCHED outlet is not controlled by the amplifier. It
will continually supply power to any unit connected to it. The total
maximum power consumption of the component attached to this outlet
must not exceed 200 watts. Note that the AC outlets are size- -coded for
polarity, so be sure to insert the plugs correctly.
(4) INPUT BALANCE control
Used to obtain the best surround condition. Adjust this control so that the
center sound from the rear speakers is at a minimum.
Advertisement
Table of Contents
