Table of Contents
Advertisement
DELAY TIME control:
This control is used to vary the audio time delay to the rear speakers from
0.0 to 30 milliseconds.
Title edit operation
These buttons are also used to edit a title to be recorded on the VCR.
First, press the TITLE EDIT button for more than 1 second, until the
blinking TITLE EDIT indicator lights steadily. Once the characters and the
position of cursor appear on the monitor TV, you can edit a title with these
buttons. The characters of the title can be selected from among the
alphabetical, numerical and various other symbols. For details, see the
"EDITING A TITLE" section.
6) REC OUT PICTURE selectors
These buttons are used to select the video source (CD Video player,
Laservision player, Television, Video Cassette recorder 1 or 2, or other
video component) to be sent to the video out recording jack (VCR 1 or 2
OUT) at the rear of this unit. This enables video recording of any source,
even while monitoring another.
When video recording is not desired, press the OFF selector.
Q REC OUT SOUND selectors
These buttons are used to select the audio source (Turntable, Tuner,
Tape deck 1, Tape deck 2, CD Video player, CD player, Laservision
player, Television, Video cassette recorder 1, Video cassette recorder 2
or other audio/video component) to be sent to the audio REC OUT
terminals. This enables audio recording of any source, even n while
monitoring another.
When audio recording is not desired, press the OFF selector.
© ENHANCER REC and MONITOR buttons
These buttons are used to select the signal to be video enhanced. When
the REC button.is pressed, the signal being recorded is video enhanced.
To clear this function, press the REC button again. The VIDEO
ENHANCER REC indicator goes off. When the MONITOR button is
pressed, the signal being monitored is video enhanced. To clear this
function, press the MONITOR button again. The VIDEO ENHANCER
| MONITOR indicator goes off.
С) REAR LEVEL volume control
This control raises or lowers the volume level of the rear speakers. Press
the UP side of the control to raise the volume level and press the DOWN
side to lower it.
@ INPUT SELECTOR button
This button is used to select the sound of the audio or video source you
wish to monitor (Turntable, Tuner, Tape deck 1, Tape deck 2, CD Video
player, CD player, Laservision player, Television tuner, Video Cassette
Recorder 1, Video Cassette Recorder 2, or Auxiliary).
*
When the sound of a video source is selected, the picture of that video
Source is automatically selected. If you wish to watch something other
than it, press the PICTURE SELECTOR button to select the desired
picture.
Q TITLE EDIT button and indicator
This button is used to select the title editing function. To edit a title, first
press this button for more than 1 second until the TITLE EDIT indicator
lights steadily, and then operate the SURROUND PROCESSING
MODE `
buttons.
22
Advertisement
Table of Contents
