Table of Contents
Advertisement
@ Audio MUTING indicator
This indicator lights when Muting is engaged (from the remote control
unit). By pressing the MUTE —20 dB key of the remote control transmitter,
the sound level will be muted by 20 aB.
@ PICTURE SELECTOR buttons
This button is used to select the picture of the video source you wish to
monitor (CD Video player, Laservision player, Television tuner, Video
Cassette Recorder 1, Video Cassette Recorder 2, Auxiliary or OFF).
When the sound of a video. source is selected with the INPUT
SELECTOR button, the picture of that video source is automatically
selected. If you wish to watch something other than it, select the
desired video source picture with the PICTURE SELECTOR button.
When a picture is not desired, press the PICTURE SELECTOR button
until none of the indicators is lit.
@ VOLUME control and power indicator
This control is used to adjust the output volume level. Turning the control
clockwise increases the sound level, and turning it counterclockwise
decreases the sound level. This control acts as the master volume
control: it increases and decreases the volume level to both the front and
rear speaker pairs. The built-in indicator lights when the POWER switch is
turned on.
@ POWER switch
This switch is used to turn the power to the unit on and off.
Press it to supply power. Press the switch again to turn the power off.
23
(B HeadPHONES jack
This jack is used to privately listen to the sound. Insert your headphone
plug into it.
(D AUX jacks
These jacks are used to connect an auxiliary video/audio input source
such as a camera, to the amplifier.
1
@ VIDEO ENHANCER controls
DETAIL control:
This control is used to increase the sharpness of the picture (i.e. to
sharpen the edges and contours),
VIDEO LEVEL control:
This control is used to increase or decrease the picture brightness.
@ BASS EXTENSION switch
This switch is used to activate a circuit which effectively extends the low
frequency output of the amplifier.
Advertisement
Table of Contents
