Yamaha AVX-100U Owner's Manual page 10

(3) This unit can be used as an Integrated Amplifier in a 5-Speaker
System using a power amplifier for the rear speakers.
In this configuration, the unit functions as a preamplifier, controlling all of
the audio and video components in your system, and as a power
amplifier for a pair of front speakers and center speaker.
Another power amplifier is necessary to drive the rear speakers.
To set up this system:
1. Connect the supplied shorting bis between the MAIN IN A jacks and
the FRONT jacks, and between the MAIN B IN jacks and the
ENHANCED CENTER NORMAL jack and the INVERT jack in the
OUTPUT section on the rear panel of this unit.
2. Connect the REAR OUTPUT jacks to the INPUT jacks of a power
ampiitier, |
If your system's power amplifier is an integrated amplifier or
receiver, the REAR OUTPUT jacks may be connected to the TAPE
IN jacks, the AUX jacks, or any component input jacks other than
PHONO. |
That signal must then be selected by the integrated amplifier's or
receiver's front panel INPUT SELECTOR. `
The REAR OUTPUT jacks on the rear panel of this unit send the audio
signals to your system's power amplifier to drive the rear speakers.
3. Connect the front speakers to the SPEAKERS A terminals and center
speaker to the BTL/CENTER © and @ of the SPEAKERS B
terminals on the rear panel of this unit.
* Follow the speaker connection procedures as outlined later in the
CONNECTIONS section.
4. Connect the rear speakers to the speaker terminals Of your system's
power ОД
Front speakers
Left and Right INPUT jacks
Amplifier | Center speaker