Table of Contents
Advertisement
. (4) This unit can be used as an Integrated Amplifier in a 5-Speaker
System using a power amplifier for the front speakers (if, for
example, the other amplifier is a stronger one).
In this configuration, the unit functions as a preamplifier, controlling all of
the audio and video components in your system, and as a power
amplifier for a pair of rear speakers and a center speaker.
Another power amplifier, stronger than this unit, is necessary to drive the
front speakers.
To set up this system:
1. Connect the supplied shorting bars between the MAIN IN A jacks and
the REAR jacks, and between the MAIN IN B jacks and ENHANCED
CENTER NORMAL jack and INVERT jack in the OUTPUT section on
the rear panel of this unit.
*
|f your system's power amplifier is an integrated amplifier, the
FRONT OUTPUT jacks may be connected to the TAPE IN jacks,
the AUX jacks, or any component input jacks other than PHONO.
That signal must then be selected by the integrated amplifier's front
panel INPUT SELECTOR.
The FRONT OUTPUT jacks on the | rear panel of this unit send the
audio signals to your system's power amplifier to drive the front
speakers.
3. Connect the rear speakers to the SPEAKERS A terminals and center
speaker to the BTL/CENTER © and @ of the SPEAKERS B terminals
on the rear panel of this unit.
*
Follow the speaker connection procedures as outlined later in the
CONNECTIONS section.
4. Connect the front speakers to the speaker terminals of your system's
power amplifier.
This unit driving a pair of rear speakers and a center speaker while
another power amplifier driving the front speakers
Front speakers
ШТІ
|қ (I
Ф Eri
e) ©} teal
8
ARNG: =
Rear speakers
Advertisement
Table of Contents
