Table of Contents
Advertisement
(D POWER key
This key is used to turn this unit and any components connected to the
switched outlets on and off.
(2 INPUT selector keys
These keys are used to select the source you wish to monitor.
(3) TUNER PRESET keys
The A/B key is used to change the preset station range.
The UP and DOWN keys are used to select the preset station.
PHONO PLAY/CUT key
This key is used to control the start and stop operations of a turntable.
(5) TAPE deck control keys
These keys are used to control the operations of a cassette tape deck.
REC/PAUSE key:
Press this key to put the deck into Rec Standby mode or Rec Pause .
mode.
DIR A key (for a double cassette deck only):
Press this key to change the tape running direction of DECK A.
PLAY key:
Press this key to start tape play or to begin recording from Rec Standby
mode or Rec Pause mode.
DIR B (for a double cassette deck only):
Press this key to change the tape running direction of DECK B.
DECK A/B key (for a double cassette deck only):
Press this key to select which deck is to be operated, either DECK A or
DECKB.
`
REC MUTE key:
Press this key to make a blank section during recording.
PP» and << key:
|
These keys are used with a deck that has a Direction button. Press either
the BP or "44 key, the one pointing in the same direction as the
Direction indicator, to fast-forward a tape. To fast-rewind a tape, press
either the Pl» or 44 key, the one pointing in the opposite direction as
the Direction indicator.
If your deck has no Direction button, press the P» key to fast-forward a
tape and press the <
key to fast-rewind a tape.
STOP key:
Press this key to stop a tape.
(6) SURROUND keys
ON/OFF key:
|
This key has the same function as the SURROUND PROCESSING
MODE ON/OFF button on the amplifier.
. DELAY TIME UP and DOWN keys:
These keys have the same function as the SURROUND PROCESSING
MODE DELAY TIME button on the amplifier.
SURROUND
MODE UP and DOWN keys:
' These keys are used to select the SURROUND PROCESSING MODE.
Press the UP key to increase the number of the SURROUND
PROCESSING MODE. Press the DOWN key to decrease the number of
the SURROUND PROCESSING MODE.
(7) DISPLAY key
Press this key to display the mode of this unit on the monitor screen.
When a picture is being monitored, the display is superimposed on the
picture.
The display shows the settings of the INPUT (SOUND) SELECTOR,
(INPUT) PICTURE SELECTOR, REC OUT SOUND, REC OUT PICTURE,
MUTING, VIDEO ENHANCER, SURROUND MODE, DELAY TIME and
HEAR LEVEL.
|
When the display is not desired, press this key again.
26
Advertisement
Table of Contents
