Table of Contents
Advertisement
e At this time, only the REC OUT selectors can be operated, and VIDEO
3.
ENHANCER REC is selected automatically.
Move the blinking cursor to the point at which a character will be input.
To move the cursor from left to right, press the 4/8 button. To move
the cursor from right to left, press the 3/7 button.
. Select a character.
Press either the DOWN or UP side of the DELAY TIME button until the
desired character appears in the position under the character line.
Press the DOWN side to move the characters to the left and the UP
side to move the characters to the right.
А character will be input to this position.
With the 3/7 button
«@ 1 B
With the 4/8 button
| —
«
——
-
000000000000000000200000
000000000000000000000009
АВСОЕЕСНТ ОК
MNOPQRSTUUWX
3—4
L e
This position's character
will then be input to the
cursor position.
5. Press the 2/6 button to input the selected character to the cursor
position.
6. Repeat steps 3 to 5 for the other characters of the title. in this way, you
can select up to 24 characters for the first, second, and third lines.
7. After all of the title characters are input, press the 1/5 button to set the
title. The cursor and character lines disappear, and the screen only
shows the title (Set mode).
8. Lay out the title.
е To select the title position
Pressing the 1-4/5-8 button moves the title to a higher position.
Pressing the ON/OFF button moves the title to a lower position.
е To select the width of the characters on the first line
|
Each time the 4/8 button is pressed, the width will change, from 2
times larger than the original width, to 3 times larger, to 4 times larger,
and then back to the original width.
е To select the height of the characters on the first line
Each time the 3/7 button is pressed, the height will change, from 2
times higher than the original height, to 3 times higher, to 4 times
higher, and then back to the original height.
® To select the width of the characters on both the second and
third lines
Each time the UP side of the DELAY TIME button is pressed, the width
of the characters on both the second and third lines will change, from
2 times larger than the original width, to 3 times larger, to 4 times
larger, and then back to the original width.
€ To select the height of the characters on both the second and
third lines
Each time the DOWN side of the DELAY TIME button is pressed, the
height of the characters on both the second and third lines will change,
from 2 times higher than the original height, to 3 times higher, to 4
times higher, and then back to the original height.
32
Advertisement
Table of Contents
