Table of Contents
Advertisement
Ш ТО SUPERIMPOSE THE CURRENT MODE OF THIS UNIT
- ON THE PICTURE
|
You can see the current mode at a glance without checking the settings
of the controls. Three superimposition modes are available: DISPLAY
OFF, FULL (which displays the superimposed settings indefinitely), and
DISPLAY SHORT (which displays the superimposed settings for a few
seconds before turning them off automatically).
Fuil display
1. Press the DISPLAY key on the remote control transmitter. The display
on the monitor screen will show the settings of the INPUT (SOUND)
SELECTOR, (INPUT) PICTURE SELECTOR, REC OUT SOUND, REC
OUT PICTURE, MUTING, VIDEO ENHANCER, SURROUND MODE,
DELAY TIME and REAR LEVEL.
_ 2. To make the display disappear, press the DISPLAY key twice.
Short display
Press twice the DISPLAY key on the remote control transmitter. The
display on the monitor screen will show the settings of the INPUT
(SOUND) SELECTOR, (INPUT) PICTURE SELECTOR, REC OUT
SOUND, REC OUT PICTURE, MUTING, VIDEO ENHANCER,
SURROUND MODE, DELAY TIME and REAR LEVEL. The display will
automatically disappear after a few seconds.
@ When REC OUT SOUND, REC OUT PICTURE, INPUT SELECTOR,
PICTURE SELECTOR, ENHANCER REC or MONITOR, or
SURROUND PROCESSING MODE is pressed, the corresponding
mode will be displayed on the screen without pressing the DISPLAY
key.
|
RECORDING
This unit allows you to record:
an audio or video program source,
the video portion of one source mixed with the audio portion of another
video program source (or another audio program source),
or only the video or audio portion of a video program source.
1. Press the POWER switch to turn the unit ON.
2. To record an audio program source
Select the audio program source to be recorded with the REC OUT
SOUND selector.
|
То record а video program source
|
Select the video program source to be recorded with the REC OUT
SOUND selector and the REC OUT PICTURE selector.
To record the video portion of a video program source mixed with
the audio portion of another video program source, or with
another audio program source
select the video portion to be recorded with the REC OUT PICTURE
selector, and an audio portion of a video program source or an audio
program source to be recorded with the REC OUT SOUND selector.
To record only the audio or video portion of a video program
source
Select the desired audio or video portion to be recorded with the REC
OUT SOUND or REC OUT PICTURE selector, and press either the
REC OUT SOUND OFF ог REC OUT PICTURE OFF selector for the
portion not to be recorded.
30
Advertisement
Table of Contents
