Useful Tips For Recording; Adjusting The Recording Level - Sony MDS-302 Operating Instructions Manual

Recording on MDs
DISPLAY cc
If "Auto Cut" appears in the display
The Auto Cut Function has been activated. This
happens when there is no sound input for more than
30 seconds while INPUT is at DIGITAL and the source
connected through DIGITAL IN. The recorder changes
to recording pause and the 30 seconds of silence are
replaced by a blank of about 3 seconds.
If "Smart Space" appears in the display
The Smart Space Function has been activated. This
happens when there has been an extended silence (of
not more than 30 seconds) between two input signals
when INPUT is at DIGITAL and the source connected
through DIGITAL IN. The Smart Space Function
instantaneously replaces the silence with a blank of
about 3 seconds even as the recorder continues
recording.
Playing back tracks just recorded
Do this procedure to immediately playback tracks that
have just been recorded.
Press E> immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after recording
1 Press W again after stopping recording.
2 Press ©.
Playback starts from the first track of the MD.
J
REC LEVEL
4 New
Bb Il Gz
L Sueeeeeees
TR
8 4 0
4 Stop playing the program source.
9 Tostart recording, do the procedure starting from
Step 8 of "Recording on an MD" on page 6.