Playing Mds; Playing An Md .U - Sony MDS-302 Operating Instructions Manual

Playing MDs
o a eee ee
Playing an MD
Before you begin, make sure you have connected the
recorder to an amplifier correctly and firmly as
indicated on page 5.
POWER Disc compartment oH
KK AMS Pr
1 Tum on the amplifier and set the source selector to
MD recorder.
2 Press POWER to turn on the recorder.
The ON/STANDBY indicator changes from red to
green.
3 Insert the MD with the label side up and the arrow
pointing toward the opening into the disc
compartment until the recorder grips it.
If you insert the MD while the recorder is off, the
recorder will turn on automatically.
"Welcome" appears in the display.
With the arrow
'pointing this way
With the label side up
The disc name appears, followed by the total
number of tracks (Tr) and total disc playing time.
A music calendar showing all the track numbers
appears within a grid if the MD is a premastered
disc, or without a grid if the MD is a recordable
disc.
Music calendar Disc name
Total number of tracks Total disc playing time
If the total track number exceeds 25, > appears to
the right of number 25 in the music calendar.
To label a recordable disc and its tracks, see
"Labeling Recordings" on page 23.
4 Press >.
The MD starts playing.
The current track number, track title (if labeled), and
elapsed playing time of the current track light up in
the display.
To stop playback
Press W.
When you want to Do the following:
Pause Press ill
Resume play after pause Press C> or il
Go to the next track Turn AMS clockwise (or
press P on the remote)
Turn AMS
counterclockwise (or
press ké on the remote)
Press & EJECT
Go back to the preceding track
Remove the MD
"C You can locate and play back a track while the
recorder is stopped
1 Turn AMS (or press kE or >P) until the number of
the track you want to play appears.
2 Press AMS or ©.
¢ When you listen with headphones
Connect the headphones to the PHONES jack. You can
adjust the volume with the LEVEL control.