Sony MDS-302 Operating Instructions Manual page 24

24
Editing Recorded MDs
Select the character type as follows:
SSS aaa EE a POR
To select Press
Enter one character at a time.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
Repeat Steps 2 and 3 until you have entered the
entire title.
If you entered the wrong character
Press << or >P until the character to be corrected starts
flashing.
Press CLEAR to erase the incorrect character, then enter
the correct one.
Press NAME again.
The entered title appears on the left side of the
display window after the label has been recorded.
To cancel labeling
Press W.
Changing an existing title
1
Press NAME, then do the following:
To change Make sure that the recorder is
A track title Playing or pausing the track
whose title is to be changed
A disc name Stopped
Keep pressing CLEAR (or EDIT/NO on the
recorder) until the current title is erased.
Enter the new title.
Do Steps 3 to 5 of "Labeling Recordings" on page 23,
or Steps 2 to 4 of "Labeling tracks and MDs with the
remote" on this page.
4 Press NAME.
simultaneously.
Note that once erased, titles cannot be recovered.
3 Press YES.
All titles are erased.
To cancel the Name Erase Function
Press W.
¢ You can erase all recorded tracks and titles
See "Erasing all tracks on an MD" on page 19.