Moving Recorded Tracks (Move Function) - Sony MDS-302 Operating Instructions Manual

22
Editing Recorded MDs
To cancel the Combine Function
Press EDIT/NO or E.
QY You can undo a track combination
Divide the tracks again (see "Dividing Recorded Tracks"
on page 20), then repeat the combine function with the
correct tracks if necessary.
Note
If "Sorry" appears in the display, the tracks cannot be
combined. This sometimes happens when you've edited the
same track many times, and is due to a technical limitation of
the MD system, not a mechanical error.
Example: Moving track 3 to track position 2
Track 1 2 3 4
number E i
; ; Track 3 changes to
Moving | | g~~ track 2
vb 1 2 3 4
1 Turn AMS until the track number you want to move
appears in the display.
2 Press EDIT/NO repeatedly until "Move ?" appears
in the display.
3 Press YES.
The track number to be moved and the new track
position appears.
3 >> Pe ok?
>
ES, -20 -12 6 -4 0
4 Turn AMS until the new track position appears.
3 °° ya ok?
isa -20 -12 4 4 0
pæ
5 Press YES or AMS.
After you have moved the track, "Complete"
appears for a few seconds and the moved track
begins playing back if the recorder is in playback
mode.
To cancel the Move Function
Press EDIT/NO or E.