Labeling Recordings (Title Function) - Sony MDS-302 Operating Instructions Manual
Hide thumbs
Also See for MDS-302:
- Service manual (50 pages) ,
- Operating instructions manual (30 pages) ,
- Dimensions (1 page)
Table of Contents
Advertisement
Labeling Recordings (Title
Function)
KK AMS
>I
EDIT/NO
YES
</P>
Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing or
recording. If the track is playing, be sure to finish
labeling before the track ends. If the track ends
before you've completed the labeling procedure,
the characters already entered are not recorded and
the track will remain unlabeled.
1
Press EDIT/NO repeatedly until "Name in ?"
appears in the display, then do the following:
To label
Make sure that the recorder is
A track
Playing, pausing or recording the
track to be labeled
An MD
Stopped
2
Press YES.
A flashing cursor appears in the display.
11 12 13 14 15
16 17 18
Ro
agB-CO-40
-20 -12
-$
4
0
4 5
6
7
8
9 10
11 12 13 14 15
16 17 18
Ra
d8-o0 +0 -20 -12 -8 4
0
The selected charactor flashes.
Letters, numbers, and symbols appear in sequential
order as you turn AMS.
You can use the following symbols in titles:
I" # $%&'()*+,
-./:;<=>?@_`
Editing Recorded MDs
4
Press AMS to enter the selected character.
siz
4
5
6
7
8
9 10
aN
11 12 13 14 15
16 17 18
Le
Rw
dB-co-@
-%0 -12
86 4
0
5
Repeat Steps 3 and 4 until you have entered the
entire title.
If you entered the wrong character
Press << or >P until the character to be corrected starts
flashing, and repeat Steps 3 and 4 to enter the correct
character.
To erase
a character
Press << or PP until the character to be erased starts
flashing, then press EDIT/NO.
To enter a space
Press AMS or >> while the cursor is flashing.
6
Press YES.
This completes the labeling procedure and the title
appears on the left side of the display.
To cancel labeling
Press W.
Note
You cannot label a track or an MD while you are recording
over an existing track.
Labeling tracks and MDs with the remote
Use the following procedure to label a track or an MD
with the remote.
Alphabet/number
buttons
NAME
CLEAR
NUM
=
CAPS
1
Press NAME repeatedly until a flashing cursor
appears in the display, then do the following:
To label
Make sure that the recorder is
A track
Playing, pausing or recording the
track to be labeled
An MD
Stopped
(Continued)
23
Advertisement
Table of Contents
