Remove The Upper Case (With Keyboard); Disassemble The Lcd Module; Remove The Lcd Bezel - Lenovo LOQ 15AHP9 Hardware Maintenance Manual

Hide thumbs Also See for LOQ 15AHP9:
Table of Contents

Advertisement

LCD module

Remove the upper case (with keyboard)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
"Remove the touchpad bracket" on page 32
"Remove the speakers" on page 32
"Remove the DC-in bracket" on page 33
"Remove the Wi-Fi card" on page 34
"Remove the 2242 solid-state drive (for selected models)" on page 36
"Remove the 2280 solid-state drive (for selected models)" on page 36
"Remove the CMOS battery" on page 37
"Remove the DIMM shielding" on page 38
"Remove the memory module" on page 39
"Remove the strip cover" on page 40
"Remove the thermal module" on page 42
"Remove the system board" on page 43
"Remove the Type-C bracket" on page 45
"Remove the LCD module" on page 46
Go to
https://support.lenovo.com/partslookup
replacement part:
Upper case (with keyboard)

Disassemble the LCD module

Before disassembling the LCD module, make sure it has been detached from the upper case assembly.

Remove the LCD bezel

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the LCD module" on page 46
Step 1.
Remove the LCD bezel.
48
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following

Advertisement

Table of Contents
loading

Table of Contents