Remove The Upper Case (With Keyboard); Remove The Hinge Cover - Lenovo ThinkBook 14 Gen 6 Hardware Maintenance Manual

LCD module

Remove the upper case (with keyboard)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the battery pack" on page 29
"Remove the battery protective sponge" on page 29
"Remove the Wi-Fi card" on page 30
"Remove the I/O bracket" on page 31
"Remove the 2242 solid-state drive and bracket (for selected models)" on page 32
"Remove the 2280 solid-state drive (for selected models)" on page 34
"Remove the fan (ThinkBook 14 Gen 6)" on page 36
"Remove the fan (ThinkBook 16 Gen 6)" on page 36
"Remove the heat sink" on page 37
"Remove the memory module" on page 39
"Remove the speakers" on page 40
"Remove the touchpad board cable" on page 41
"Remove the I/O board (ThinkBook 14 Gen 6)" on page 42
"Remove the I/O board (ThinkBook 16 Gen 6)" on page 44
"Remove the fingerprint reader module (for selected models)" on page 45
"Remove the power button (for selected models)" on page 47
"Remove the system board and I/O board cable" on page 48
"Remove the LCD module (for non-touch screen models)" on page 50
"Remove the LCD module (for touch screen models)" on page 51
Go to
https://support.lenovo.com/partslookup
replacement part:
Upper case (with keyboard)

Remove the hinge cover

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the upper case (with keyboard)" on page 53
Step 1. Remove the hinge cover.
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
53