Remove The Upper Case (With Keyboard And Touchpad) - Lenovo 21A200M2IX Hardware Maintenance Manual

Figure 36. Remove five screws and remove the LCD unit
Screw specifications
M2.5 x L5.5

Remove the upper case (with keyboard and touchpad)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 33
"Remove the 2242 solid-state drive (SSD)" on page 34
"Remove the 2280 solid-state drive (SSD)" on page 34
nd
"Remove the 2 solid-state drive (SSD)" on page 35
nd
"Remove the 2 solid-state drive (SSD) bracket" on page 36
"Remove the hard disk drive (HDD)" on page 37
"Remove the Wi-Fi card" on page 38
"Remove the heat sink" on page 39
"Remove the fans" on page 40
"Remove the memory module" on page 40
"Remove the CMOS battery" on page 41
"Remove the I/O bracket (left)" on page 42
"Remove the I/O bracket (right)" on page 43
"Remove the I/O board with cable" on page 43
"Remove the power board with cable" on page 45
"Remove the fingerprint board with cable" on page 46
"Remove the lens light guide" on page 47
"Remove the speakers" on page 48
"Remove the system board" on page 48
"Remove the LCD module" on page 49
Number of screws
5
.
Chapter 4 Removing a FRU or CRU
51