Figure 9. Disconnect the battery pack cable, remove two screws, and remove the DC-in bracket
Screw specifications
M2 × L4
Go to
https://support.lenovo.com/partslookup
replacement part:
DC-in bracket
Remove the Wi-Fi card
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board and remove the Wi-Fi mylar.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
34
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following
Torque
1.85 ± 0.15 kgf-cm