Table of Contents
Advertisement
Figure 26. Remove two screws and remove the antennas from the cable guide
Screw specifications
M2 × L3
Step 2.
Remove four screws, remove the EDP cable, camera cable, and antennas from the cable guide,
and remove the LCD module.
Figure 27. Remove four screws, remove the cables from the cable guide, and remove the LCD module
Screw specifications
M2.5 × L3.5
Go to
https://support.lenovo.com/partslookup
replacement part:
Number of screws
2
Number of screws
4
to look up the Lenovo part numbers of the following
Torque
1.85 ± 0.15 kgf-cm
Torque
3 ± 0.3 kgf-cm
.
Chapter 4
Removing a FRU or CRU
47
Advertisement
Table of Contents
