Remove The Upper Case (With Keyboard); Remove The Hinge Cover (For Lcd Non-Touch And Oled Models) - Lenovo Slim 7i Hardware Maintenance Manual

Figure 25. Rotate and remove the LCD module
Go to https://support.lenovo.com/partslookup
replacement part:
LCD module

Remove the upper case (with keyboard)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the battery pack" on page 29
"Remove the speakers" on page 29
"Remove the 2242 solid-state drive and bracket (for selected models)" on page 30
"Remove the 2280 solid-state drive (for selected models)" on page 32
"Remove the Wi-Fi card" on page 33
"Remove the heat sink" on page 34
"Remove the fans" on page 35
"Remove the I/O board" on page 36
"Remove the touchpad board cable" on page 38
"Remove the system board and I/O board cable" on page 39
"Remove the LCD module" on page 41
Go to https://support.lenovo.com/partslookup
replacement part:
Upper case (with keyboard)

Remove the hinge cover (for LCD non-touch and OLED models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 41
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
43