Table of Contents
Advertisement
Figure 18. Remove the I/O board cable
Go to
https://support.lenovo.com/partslookup
part:
I/O board cable
Remove the fingerprint board module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 60
"Remove the battery pack" on page 61
Step 1.
Remove one screw then remove the fingerprint board bracket.
Figure 19. Remove the fingerprint board bracket
Screw specifications
M2 x L2
Step 2.
Disconnect the fingerprint board cable from the fingerprint board and system board. Remove the
fingerprint board cable.
to look up the Lenovo part number of the following replacement
Number of screws
1
.
Chapter 4
Removing a FRU or CRU
43
Advertisement
Table of Contents
