Table of Contents
Advertisement
en Rails
14.4 Wiping the appliance after the cleaning
function
Allow the appliance to cool down.
1.
Wipe the cooking compartment with a damp cloth.
2.
Note: During operation and while the cleaning func-
tion is active, reddish patches may form on the sur-
faces. This is not corrosion but rather residue from
Rails
15 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
15.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the front rail upwards and unhook it.
1.
Then push the entire rail to the front and remove it.
2.
Appliance door
16 Appliance door
It is normally sufficient if you clean the outside of the
appliance door. If the appliance door is very dirty on
the inside and outside, you can remove the appliance
door and clean it.
22
food that contains salt. Nutrients such as sugars
and proteins are not removed from the surface coat-
ing and may stick to the surface. These spots are
not harmful and do not impair the cleaning ability of
the self-cleaning surfaces.
Attach the shelf supports.
3.
→ "Rails", Page 22
15.2 Attaching the rails
First insert the rail into the rear socket, press it to
1.
the back slightly
and insert it into the socket at the front.
2.
The rails fit both on the left and right sides. Shelf po-
sitions 1 and 2 are located at the bottom and shelf
positions 3, 4 and 5 are located at the top. Pull out
the telescopic rail towards the front.
16.1 Door hinges
WARNING ‒ Risk of injury!
When the hinges are not secured, they can snap shut
with great force.
If you open the appliance door, ensure that the lock-
▶
ing levers are fully open or fully closed.
Advertisement
Table of Contents
