Table of Contents
Advertisement
ENGLISH
NAME AND FUNCTION
OF PARTS
| ee yeapeom reyes
DRA-435R
only
FRONT PANEL
DENON
precision aunio COMPONENT / AM-EM STEREO RECEIVER DRA-435R
COMPUTED MULTI FUNGTION DISPLAY SYSTEM
Mw
TIVE
kee
CHET
FM 1 CIE
Maz
17] MEMO | REMOTE SENSOR
SIGNAL] STEREO
MONO
AUTO MANU SHIFT AB
a= ON/STANDBY
POWER
(Power switch)
When the power cord is plugged into an AC power outlet,
pressing this button once, the power is turned on and the
DISPLAY lights. It takes a few seconds before sound is
output, thanks to the built-in muting circuit, preventing
audio output
until the receiver has stabilized.
PHONES
(Headphones jack)
Connect a pair of headphones (sold separately) to this jack
for private listening.
SPEAKERS
(Speaker selector switches)
These switches are used to engage speaker system A and
B,
No
sound
is heard
through
the
speakers
when
both
switches
are
reset to the m position.
REMOTE
SENSOR
(Remote
control sensor)
This sensor receives the infra-red light transmitted from the
wireless
remote
control
unit.
For remote control, point the wireless remote control unit
towards
the sensor.
BASS
(Bass control)
Use this control to adjust the low-range response.
When the control is set to the center position, the frequency
characteristic curve (below 1,000 Hz) is flat. Turn the control
clockwise
to
increase
the
bass
response
and
counter-
clockwise to decrease
it.
TREBLE (Treble control)
Use this control to adjust the high-range
response.
When the control is set to the center position, the frequency
characteristic curve (above 1,000 Hz) is flat. Turn the control
clockwise
to increase
the treble
response
and
counter-
clockwise to decrease
it.
BALANCE
(Balance control)
Use this control to balance the volume levels between left
and right channels. The volume levels in both channels are
equal when the control is set to the center position.
DRA-435R only
VARIABLE
LOUDNESS
(Loudness
control)
At low volumes, the human
ear is less sensitive to low
(BASS) and high (TREBLE) frequencies. Use this control to
compensate
for this deficiency
when
listening
at low
volume levels. Turn this control counter-clockwise until a
natural
balance
of
bass
and
treble
sound
has
been
restored.
BASS
EQ (DRA-435R
only)
Press this button to switch the BASS
EQ ON
(-) for
emphasis of bass sounds.
Use in conjunction with the bass adjustment of the tone
controi will provide further emphasis of bass sounds. Set
this switch to OFF ( )
when you wish to listen with a
normal setting condition.
VOLUME
(Volume
control)
This
knob
is used
to adjust
the volume
level
of both
channels.
Turn the knob clockwise to raise the volume and counter-
clockwise
to lower it.
SHIFT (Shift button)
Each time this button is pressed, the preset station range
will be shifted among "1 ~ 8", "9 ~ 16" and "17 ~ 24". (A:
1 ~
8, B: 9 ~ 16, AB: 17
~ 24)
Input selector (Input selector
buttons)
These buttons are used to select the audio input source.
e
PHONO:
Press to play a record
on a record player
connected
to the PHONO
input jacks.
e
CD:
Press to listen to a compact
dis:
player or
another component connected to te CD input
jacks.
e TUNER:
Press to listen to FM or AM
proagsams.
e
VIDEO:
Use when playing back the audio rom a Hi-Fi
video, video disc player or other component
connected to the VIDEO termina:
*
If a function switch is pressed quickly, the fun ction may
not actually change and no signal may beh eard from
the speakers for an instant. To avoid this,e
sure to
press function
switches
carefully.
Advertisement
Table of Contents
