Denon DRA-CX3 Owner's Manual
Am/fm stereo receiver
Hide thumbs
Also See for DRA-CX3:
- User manual ,
- Service manual (38 pages) ,
- Operating instructions manual (19 pages)
Related Manuals for Denon DRA-CX3
Summary of Contents for Denon DRA-CX3
- Page 1 AM-FM STEREO RECEIVER DRA-CX3 Owner’s Manual Manuel de l’Utilisateur Manual del usuario...
- Page 2 120V ∼ 60Hz POWER SOURCE POWER CONSUMPTION 100W 120V ∼ 60Hz ALIMENTATION CONSOMMATION 100W Denon Brand Company IMPOTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.
- Page 3 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
-
Page 4: Table Of Contents
® playback ············································································11 Troubleshooting ··········································································12 Specifications ··············································································13 Getting Started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. -
Page 5: About The Remote Control Unit
About the remote control unit The included remote control unit (RC-1060) can be used to control the DENON DCD-CX3 Super Audio CD player in addition to the DRA-CX3 (vpage 4). Inserting the batteries q Remove the remote control w Set two R03/AAA batteries in unit’s rear cover. -
Page 6: Part Names And Functions
ENGLISH Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Front panel qw e Power switch (h ON/STANDBY j OFF) ························· (9) Power indicator ··········································· (9) Remote control sensor ······························· (2) Headphones jack (PHONES) When headphones are plugged in, the sound can only be heard from the headphones. -
Page 7: Remote Control Unit
DENON DCD-CX3 Super Audio CD player as well, so the DCD-CX3 can be operated simultaneously with the DRA-CX3. When the two units have different settings, press and hold in the button for at least 2 seconds to reset them both to the default setting, then make the desired setting. -
Page 8: Connections
Input Output connected to the DRA-CX3, and be sure to interconnect the channels and polarities correctly. Peel off about 0.03 ft / 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. -
Page 9: Connecting The Antenna Terminals
If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. Connecting the antenna terminals An F-type FM antenna can be connected directly. -
Page 10: Connecting A Cd Player
CD player Turntable • Use the separately sold Control Dock for iPod (ASD-1R) to connect an iPod to the DRA-CX3. • When using a Control Dock for iPod (ASD-1R), the communications mode selection switch must be set. For details, refer to the operating instructions of the Control Dock for iPod. -
Page 11: Connecting The Power Cord
• Insert the plugs securely. Incomplete connections will result in the generation of noise. • Connect the power cord from one of the components connected to the DRA-CX3 into the DRA-CX3’s AC outlet on the rear panel. Do not use this outlet for hairdryers or other non-audio devices. -
Page 12: Operation
ENGLISH FUNCTION <ON/STANDBY / OFF> VOLUME <CD> POWER [POWER] MODE iPod EDIT [EDIT] [TUNING] MENU / [ENTER] CLEAR [CLEAR] [CHANNEL] ENTER [CHANNEL] TONE BAND [TONE] [BAND] [TUNING] TUNER PHONO [TUNER] FUNCTION LINE 1 / iPod LINE 2 LINE 3 PURE TIME DIRECT [PURE DIRECT]... -
Page 13: Recording
The frequency changes one step at a time each time pressed. Noise may be produced in the sound when receiving AM broadcasts if there is e.g. a TV nearby. If so, move the DRA-CX3 and TV as far apart as possible. Presetting... -
Page 14: Presetting Broadcast Stations Automatically (Auto Preset)
“iPod” , see page 4. NOTE • DENON will accept no responsibility whatsoever for possible loss of iPod data when using an iPod connected to the DRA-CX3. • Depending on the type of iPod and the software version, some functions may not operate. -
Page 15: Troubleshooting
Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct ? 2. Is the set being operated as described in the operating instructions ? 3. Are the other components operating properly ? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. -
Page 16: Specifications
ENGLISH Specifications Receiver section Rated output: 2-channel driving (CD 75 W + 75 W (8 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %) 150 W + 150 W (4 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %) 0.05 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz High frequency distortion: Output terminals: Speaker 4 ~ 16 Ω/ohms... - Page 18 Denon Brand Company, D&M Holdings Inc. Printed in Japan 5411 10027 007D...