Selecting The Line Mode - Panasonic KX-TC1703B Operating Instructions Manual

>
Selecting the Line Mode
if the line is connected to a low voltage system such as a PBX, set to "B"
Your phone comes from the factory set to "A"
Make sure the unit is in the standby mode
1 Press (REDIAL/PAUSE/FUNCTION
) Press (+) or (4) repeatedly until the arrow
points to "Program"
Press EDIT
Press (7) or (4) repeatedly until the arrow
points to "Set line mode"
Press EDIT (>)
Press (9) or (a) to select "B" or "A"
Press EDIT (>) (Save key)
9A beep sounds
oTo return to the standby mode, press
Y OD OR 0
Program
bSave directory
Ringer volume
WO
Ringer volume
bProgram
Save directory
Talk switching
PLCD contrast
Set flash time
Voicemail tone
PbSet line mode
Set dial mode
Line mode
A
VA >b=Save
Line mode
o You can exit the programming mode any time by pressing
15