Panasonic KX-TC1703B Operating Instructions Manual page 43

4 Press (7) or (4) repeatedly until the arrow [ Set flash time
points to "Save mailbox#".
PSave
mailbox#
Voicemail tone
Press EDIT (È).
Enter your access number, up to 32 digits. 1234567PPP89010
©You may enter pauses".
olf LLE enter a wrong number, press <> V=Next
(HOLD/CLEAR). Digits are erased from the
right. To erase all of the saa press and hold
HOLD/CLEAR).
T Press (7) (Next key). 1234567PPP8901
olf you want to edit the entered number, press
(4) (Edit key) and return to step 6. A=Edit ?P=Save
©To return to the standby mode, press (OFF). Save mailbox#
*For quick access to your voice mail box by using
(FLASH/CALL WAIT/VOICE MAIL), you may add pauses between your voice
mail box access number and your mail box password in step 6.
Ex. 1-222-333-4444 PPP 8888
Your voice mail box access number | Your mail box
Pauses password
Pressing (REDIAL/P AUSE/FUNCTION) once creates a 3.5 second delay and
counts as one digit. The delay time depends on a telephone company.
To erase a stored number
Repeat steps 1 through 5 & press and hold (HOLD/CLEAR) until all of the
digits are erased > (vw) (Next key) » EDIT (È) (Save key).
oA beep sounds.
-e You can exit the programming mode any time by pressing (OFF).
43