Setting The Auto Talk Feature - Panasonic KX-TC1703B Operating Instructions Manual

» Programmable Functions
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit without pressing C>) or (5). if you want to use this
feature, turn the feature ON by programming. Your phone comes from the
factory set to OFF.
Make sure the unit is in the standby mode.
Press (REDIAL/PAUSE/FUNCTION).
Press (v) or (a) repeatedly until the arrow
; Ringer volume
points to "Program".
> Program
Save directory
Press EDIT (>). Talk switching
PLCD contrast
Set flash time
Press (v) or (4) repeatedly until the arrow set dial mode
points to "Talk switching". Talk switching
LCD contrast
Press EDIT >).
Auto
talk
:O£f
VA >b=Save
Press (v) or (4) to select "on" or "Off".
Press EDIT (>) (Save key). Auto talk
èA beep sounds. : On
To return to the standby mode, press (OFF).
Y OD NON kk WH Ndl
eYou can exit the programming mode any time by pressing (OFF).
eTo answer a call when the Auto Talk feature is OFF, lift the handset off the base
unit and press or {@).
18