Table of Contents
Advertisement
Quick Links
Operating Instructions
Model No.
KX-TC1466LAB
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
If there is any trouble, disconnect the unit from the telephone line and
connect a known working phone. If the known working phone operates
properly, do not reconnect the unit to the telephone line until the trouble
has been repaired. If the known working phone does not operate
properly, consult your telephone company.
For your future reference
Serial No.
(found on the bottom of the unit)
Name and address of dealer
Panasonic Communications Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
900MHz Cordless Phone
KX-TC1466LAB
KX-TC1466LCB
KX-TC1467LAB
Pulse-or-tone dialing capability
PLEASE READ BEFORE USE
AND SAVE.
Charge the battery for 15 hours
before initial use.
Contents by Section
1 Getting Started
2 Making/Answering Calls
3 Speed Dialer
4 Special Features
5 Things You Should Know
6 Quick Guide
Date of purchase
PQQX13565ZA
F1102-0 D
Advertisement
Table of Contents
Related Manuals for Panasonic KX-TC1466LAB
Summary of Contents for Panasonic KX-TC1466LAB
- Page 1 For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Panasonic Communications Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13565ZA F1102-0 D...
-
Page 2: Getting Started
You can program the dialing mode using the handset near the base unit. The IN USE indicator light must be off before programming. ≥Use only with Panasonic AC adaptor PQWATC1461M. ≥The AC adaptor must remain connected at all times. (It is normal for the (PULSE) ¤... -
Page 3: Making/Answering Calls
Making/Answering Calls Section 2 2-A Making Calls To redial the last number dialed ¤ (–––/FLASH) (PAUSE/REDIAL) Press (–––/FLASH) Press ≥The IN USE indicator lights. To adjust the receiver volume ≥If an alarm tone sounds, see section 5-F. 4 levels (HIGH, MEDIUM, NORMAL, LOW) are Dial a phone number. -
Page 4: Special Features
Things You Should Know “ Things 5-A Battery Recharge Battery information If the unit beeps or the IN USE After your Panasonic battery is fully charged: indicator flashes slowly when you (–––/FLASH) Operation Operating time press or while talking, the call will be disconnected within... - Page 5 Special Features Section 4 4-D How to Use the PAUSE Button (For PBX Line/Long Distance Calls) (PAUSE/REDIAL) We recommend you press if a pause is required to dial with a PBX or to make a long distance call. Ex: Line access number (PBX) ¤...
- Page 6 5-D Battery Replacement If the IN USE indicator flashes after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic PQWBTC1461 (P-P504) battery. Press the notch on the handset cover firmly (1) and...
- Page 7 Things You Should Know Section 5 5-F Before Requesting Help Problem Cause and Remedy Problem Cause and Remedy The unit does not work. ≥Check the settings (1-C). You cannot store a phone ≥You cannot store a number while the unit ≥Charge the battery fully (5-A).
- Page 8 Quick Guide Section 6 6-A Preparation Connect as shown. Install the battery in the handset and close the handset cover, locking it into place. For maximum distance and Black Fasten the noise-free operation, place Lead Lead AC adaptor the base unit in a HIGH and cord to prevent CENTRAL location with no it from being...
-
Page 9: Important Safety Instructions
Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 11. Read and understand all instructions. 12. Follow all warnings and instructions marked on this unit. 13. - Page 10 CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the battery(ies) specified. 2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. 3.
-
Page 11: Fcc And Other Information
FCC and Other Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAA-----. If requested, this number must be provided to the telephone company. - Page 12 ≥If there is any trouble—disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone...
- Page 13 Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,...
- Page 14 ≥Send the unit to an authorized servicenter, prepaid and adequately insured. ≥Do not send your unit to the Panasonic Consumer Electronics Company listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products.
- Page 15 1-800-211-PANA(7262) Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park...