Selecting The Line Mode - Panasonic KX-TG2650ALN Operating Instructions Manual

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the Call Waiting Caller ID Feature may not function (p. 47).
Your phone comes from the factory set to "A".
Use the handset near the base unit.
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/CH)
Press or
2
Ö
points to "Program".
3 Press (Yes key).
á
4 Press or
Ö
points to "Set line mode".
5 Press (Yes key).
á
Press or
6
Ö
7 Press (Save key).
á
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base. Place on cradle and try again." is displayed.
.
repeatedly until the arrow
Ñ
repeatedly until the arrow
Ñ
to select "B" or "A".
Ñ
H
Save directory
Ringer volume
GF H
=Yes
H
Program
GF H
=Yes
H
Save DIRECT#
Set recall time
GF H
=Yes
H
Set line mode
Talk switching
GF H
=Yes
Line mode
GF H
=Save
Line mode
GF H
=Save
Line mode
:A
:B
:B
13