Panasonic KX-TC1703B Operating Instructions Manual page 53

[>
Problem | Cause and Remedy
You cannot program items, eProgramming is not possible while the
such as the dialing mode. unit is in the talk or speakerphone
mode, when viewing the Caller
List/directory list.
©Do not pause for over 60 seconds while
- programming.
oMove closer to the base unit.
o(y), (a), CH or EDIT (œ) may have
been pressed when you picked up the
handset. Press and try again.
olf a power failure occurs, programmed
information may be erased. Reprogram
Previously programmed
information is erased.
if necessary.
You cannot store a name oYou cannot store an item in the
and phone number in the directory while the unit is in the talk
Girectory. mode.
©Do not pause for over 60 seconds while
| storing.
While programming or oTo answer the call, press or (1%).
searching, the unit starts to Start again from the beginning after
| ring and stops the program/ hanging up.
į search.
The unit does not display the | oYou do not subscribe to a Caller ID
caller's name and/or phone service.
number. eOther telephone equipment may be
interfering with your phone. Disconnect
it and try again.
eOther electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
o Telephone line noise may be affecting
the Caller ID information.
The handset display goes to | eDo not pause for over 60 seconds while
the standby mode while searching.
viewing the Caller List.
uone
a