Projecta IQD2 Manual page 7

B. Using the supplied 3M double-sided adhesive:
i. Without the bracket
1. Clean the back of the IQD2 with
an alcohol swab, attach the provided
double-sided tape.
ii. With the bracket
1. Clean the back of the bracket
with an alcohol swab and attach the
provided double-sided tape.
4. Fasten the bracket and screen with
provided screws and hex key.
2. Thread the loom through the pre-
drilled hole. Then, connect the plug to
the smart display's back receptacle.
2. Thread the loom through the pre-
drilled hole. Then, connect the plug to
the smart display's back receptacle.
5. Stick the product on the clean, even
surface and let it set 12+ hours for
strong adhesion.
3. Stick the product on the clean, even
surface and let it set 12+ hours for
strong adhesion.
3. Insert the screen in the bracket,
adjust for viewing, and ensure proper
gear engagement.
7