Flush Mounting With Gang Box - HIKVISION D Series User Manual

Video Intercom D Series Door Station User Manual

3.2.2 Flush Mounting with Gang Box

Steps
1. Drill a hole in the wal for inserting the gang box. The size of the hole should be
larger than that of the gang box. The suggested size of the hole is 404.5 (W) ×
123.5 (H) × 48 (D) mm.
2. Insert the gang box into the hole and fix it with 4 PA4 screws. Make sure the
edges of the gang box align to the wall.
3. Route the cables of the door station through the cable hole.
Figure 3-7 Drill an Installation Hole
Figure 3-8 Insert the Gang Box
18