HIKVISION D Series User Manual page 29

Video Intercom D Series Door Station User Manual
3. Make sure the edges of the gang box align to the wall and the hook A and hook B
of the gang box hook onto the wall.
4. Route the cables of the door station through the cable hole.
5. Insert the door station into the gang box and then move the door station
downward to hook the lock catches on the rear panel onto the hook C of the
gang box.
6. Fix the door station with 2 PM3 screws.
7. After fixing the door station onto the gang box, secure it by inserting the plate
and insert 2 POM2 screws.
Figure 3-4 Insert the Door Station
16