HIKVISION D Series User Manual page 49

Video Intercom D Series Door Station User Manual
2. Configure the network parameters.
Check DHCP, the device will get the parameters automatically.
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway
-
manually.
3. Configure the DNS server.
4. Click Save to enable the settings.
Port Settings
Steps
1. Click Network → Basic Settings → Port to enter the settings page.
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which
is not occupied.
RTSP Port
Figure 6-4 TCP/IP Settings
Figure 6-5 Port Settings
36