Sony BRAVIA Theatre Bar 9 Help Manual page 60

Help Guide
Sound Bar
BRAVIA Theatre Bar 9/BRAVIA Theatre Bar 8
[Sound Settings]
These are the settings for audio output.
The following setting items appear by tapping [Settings] - [Sound Settings] on the remote control screen on the app.
[Sound Field Optimization]
Optimizes the sound field effect. Follow the instructions on the screen.
After completing the initial setup of the speaker system and the optional speakers, if you change the location or position
where they are installed, perform this setting again.
[Sound Field Setting]
Used to select the type of surround sound effect. To enjoy the effect of the selected sound field, turn on the sound field
function on the supplied remote control or the remote control screen on the app.
[Height of Sound Field]
Adjusts the height of the entire sound field to improve the sense of unity between picture and sound.
[Acoustic Center Sync]
Outputs the center speaker portion of the speaker system sound from the TV by connecting the speaker system and TV
using the supplied HDMI cable and the supplied TV center speaker mode cable. Set [Control for HDMI] to [On].
[Sound output check]
Used to check the sound output of the current settings and see whether sound is being output consistently from each
speaker.
[DSEE Ultimate]
Plays compressed music accurately upscaled with AI technology.
[Audio DRC]
Compresses the dynamic range (range between the loudest and quietest parts) of the audio signal to make it easier to
hear softer sounds.
[DTS Dialog Control]
The volume of dialog is adjusted while content that is compatible with the DTS:X dialog control function is being played.
[A/V Sync]
Adjusts the delay between the picture and sound.
60