Sony BRAVIA Theatre Bar 9 Help Manual page 12

Switching to TV (eARC/ARC) input is in progress.
Switching to HDMI input is in progress.
Switching to BLUETOOTH input is in progress.
Switching to Spotify input is in progress.
The speaker system is being set up. Audio playback is not available.
Sub status indicator
Initial setup is not complete on the app or the speaker system is not connected to a network.
The speaker system is muted.
Setup/operation feedback
Sub status indicator
(Lit up once for a longer time in white)
The setting is switched to on.
(Flashing twice in white)
The setting is switched to off.
(Lit up once briefly in white)
The volume is going up and down.
An operation was performed in which a button on the remote control was pressed for a long time.
Operation is invalid. For example, setting cannot be changed, volume is at upper or lower limit, etc.
Special conditions
Main status indicator
The speaker system is being registered on the app.
Software updating/initialization, etc. is in progress.
Abnormality or error has been detected. Follow the steps in "Troubleshooting."
Related Topic
Troubleshooting
(Flashing twice in white)
(Flashing twice in green)
(Flashing twice in blue)
(Flashing twice in light blue)
(Flashing slowly in white/blue alternately)
(Flashing slowly in white)
(Flashing every 4 seconds in white)
(Flashing once for a longer time in white)
(Flashing three times in white)
(Flashing quickly in blue)
(Flashing in white/blue alternately)
(Flashing in red)
12
TP1001475415