Advertisement
(a) Spacing between TV legs: 800 mm (31 1/2 in) or less
(b) TV leg height: 8.5 mm (11/32 in) or less
1.
Prepare what are needed.
Feet (2) (supplied)
Screws (2) (supplied)
Phillips screwdriver (not supplied)
2.
Attach the foot to the bar speaker.
Install the foot according to the following procedure.
Place the bar speaker with the bottom of the bar speaker facing up.
Position the foot by fitting the projecting part on the inside of the foot into the hole for the foot projecting part next
to the screw hole on the bar speaker.
Secure the foot with the screw.
Projecting part
Screw hole
Hole for the foot projecting part
Screw (supplied)
3.
Install the bar speaker.
Be careful not to cover the remote control sensor on the TV with the bar speaker.
After installation, check that the TV can be turned on/off with the TV remote control.
21
Advertisement
