Sony BRAVIA Theatre Bar 9 Help Manual page 72

Hide thumbs Also See for BRAVIA Theatre Bar 9:

Help Guide

Sound Bar

BRAVIA Theatre Bar 9/BRAVIA Theatre Bar 8

Resetting the Speaker System

If the speaker system still does not operate properly with "Troubleshooting," reset the speaker system.

Press and hold

(power) on the bar speaker for more than 10 seconds.

The main status indicator on the bar speaker flashes in white/blue alternately and the reset starts. When the flashing

finishes, the reset is completed.

After the reset is completed, disconnect the AC power cord (mains lead) from the AC outlet (mains), then reconnect the

AC power cord (mains lead) after the main status indicator on the bar speaker turns off.

Note

When the speaker system is reset, delete the pairing information for the speaker system (name of the speaker system (**),

LE_name of the speaker system) from the BLUETOOTH setting on the smartphone(*), etc. connected to the speaker system.

Smartphones with the app installed, audio devices compatible with BLUETOOTH, etc.

BRAVIA Theatre Bar 9, BRAVIA Theatre Bar 8, or the device name that is set in [Unit Name].

If you reset the speaker system, perform the initial setup on the app.

By resetting, the link with the optional subwoofer and rear speakers may be lost. In this case, perform [Wireless Speaker Settings]

on the app.

When [External Control] is enabled, this reset operation alone will not delete some of the setting information. Perform the

following procedure before resetting.

Procedure: Press and hold down NIGHT (Night mode) on the supplied remote control for 5 seconds, then press

(Volume) –, and

Bravia theatre bar 8