Sony BRAVIA Theatre Bar 9 Help Manual page 16

Help Guide
Sound Bar
BRAVIA Theatre Bar 9/BRAVIA Theatre Bar 8
Remote Control Screen on the App
There are two types of remote control screens on the app.
Remote control screen that can only operate the speaker system
This screen is displayed when a TV that is not compatible with the app is connected using the HDMI cable.
Remote control screen that can operate the speaker system and BRAVIA
This screen is displayed when an app-compatible BRAVIA is connected using the HDMI cable.
The following items that can be used to operate the speaker system are displayed in [Remote], [Picture & Sound], [Audio
output], and [Settings]. If the TV is not turned on, a remote control screen that can only operate the speaker system will
appear.
Items on the remote control screen on the app
[Remaining Battery Level](When connecting to the optional built-in rechargeable rear speakers)
The remaining charge level of the built-in rechargeable battery for the optional rear speakers is displayed.
Playback information/input switching area
The currently selected input, etc. appears on the upper part of the screen. The following information and operations
are displayed by tapping this area.
Playback meta information: Name, artist, album, length, etc. of the song that is currently playing.
Stream Info: Input signal frequency, etc.
Audio format: Audio format of input signal (Dolby Atmos, DTS, etc.), number of channels, etc.
Name of the BLUETOOTH device connected to the speaker system
Playback controls for the BLUETOOTH device
Input selection(*)
*
When a TV compatible with the app is connected to the speaker system using an HDMI cable, TV input can also be selected.
[ (Power) ]
Sets the speaker system to standby mode when this is tapped while the speaker system is turned on.
[Night mode]
Turns on/off the night mode on the speaker system.
[Sound field]
Turns on/off the surround sound effect on the speaker system.
[Voice mode]
Turns on/off the voice mode on the speaker system.
[Voice Zoom]
This function is enabled when a Sony TV compatible with the linkage function of the speaker system is connected.
When TV input is selected on the speaker system, the voice zoom works instead of the voice mode.
[Volume]
Used to adjust the volume of the speaker system.
[Rear level]
Used to adjust the volume of the rear speakers.
16