Sony BRAVIA Theatre Bar 9 Help Manual page 37

Hide thumbs Also See for BRAVIA Theatre Bar 9:

If the TV center speaker mode cable is not long enough, use a commercially available stereo mini cable.

There are two tactile dots that are about 1 mm in size next to the S-CENTER OUT jack. Use them as a guide during connection.

To output sound from the TV

Access [Settings] - [Sound Settings] and enable [Acoustic Center Sync] on the remote control screen on the app.

Depending on the input, audio signal, or sound field settings, sound may not be output from the TV. For details, refer to

the table below.

: Sound is output from both the speaker system and TV.

–: No sound is output from the TV. Sound is output from the speaker system only.

Setting

[Sound field](*): On and [Sound Field

Setting](**): [360 Spatial Sound Mapping]

[Sound field](*): On and [Sound Field

Setting](**): [Dolby Speaker Virtualizer],

[DTS Neural:X]

[Sound field](*): Off

Displayed on the remote control screen on the app.

Displayed when you tap [Settings] - [Sound Settings] - [Sound Field Setting] on the remote control screen on the app.

Bravia theatre bar 8