Sony BRAVIA Theatre Bar 9 Help Manual page 39

To play 360 Reality Audio content on an AV device, connect the AV device directly to the speaker system.
By connecting an AV device directly to the speaker system, higher quality audio formats such as Dolby Atmos that
are played on the AV device can also be output from the speaker system, even if the TV is not compatible with
eARC.
1.
Connect the speaker system and TV using the HDMI cable (supplied).
2.
Remove the sticker from the HDMI IN jack on the speaker system.
3.
Connect the HDMI IN jack on the speaker system and HDMI OUT jack on the AV device using an HDMI cable
(not supplied).
TV
HDMI cable (supplied)
HDMI cable (not supplied)
AV device (Blu-ray Disc player, set-top box, cable box, satellite box, gaming console, etc.)
Note
Check that the connectors are firmly inserted.
To view 8K content, the TV and HDMI cable need to be compatible with 8K. For details, refer to the operating instructions of the
TV.
Some TV controls may become limited. For instance, system sounds and voice response may not be output. For details, refer to
the operating instructions of your TV.
The types and number of devices that can be controlled by the Control for HDMI function are limited by the HDMI CEC standard
as follows.
Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): Up to 3 devices
Playback devices (Blu-ray Disc player, DVD player, etc.): Up to 3 devices
Tuner-related devices: Up to 4 devices
Audio system (receiver/headphones): Up to 1 device (used by this speaker system)
Hint
Use an HDMI cable that is compatible with the video format of the device being connected, and select the HDMI signal format by
accessing [Settings] - [HDMI Settings] - [HDMI Signal Format] on the remote control screen on the app.
39