Advertisement
Tire pressure warning system (TPWS)
The tire pressure warning system can be selected on "
Information Display (MID).
System reset initialization
(1) Press "
" or "
Information Display (MID).
(2) Press "
" or "
(3) Press "
" or "
(4) Press "
" or "
(5) Press "
" or "
then select the desired front and rear tire pressures.
OR
(5) Press "
" or "
(6) Press "
" or "
The tire pressure warning light will slowly blink 3 times and a message will be
displayed on the MID.
The tire pressure detected by the tire pressure warning system can be displayed
on the Multi-Information Display (MID).
If the tire pressure indicator flashes for approximately 1 minute and then remains
on, take the vehicle to your local Toyota dealer.
Refer to the load label on the door jamb or the "Owner's Manual" for tire inflation
specifications.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
" switches and select "
" switches and select "Vehicle Settings".
" switches and select "TPWS Setting".
" switches and select "Tyre Pressure Setting".
" switches and select "Setting by Specified Pressure" and
" switches and select "Setting by Current Pressure".
" switches and select "Yes".
"*
1
"*
or "
"*
1
2
*
1
7-in display, *
85
or "
"*
of the Multi-
2
from the Multi-
2
12.3-in display
Advertisement
