Advertisement
FEATURES & OPERATIONS
Trailer brake controller
Manual brake slider
GAIN (+/-)
selection button
The trailer brakes can be controlled by the Trailer brake controller via the 7-pin
connector. By selecting the type of brakes that are being used on the trailer
(electric or electric-over-hydraulic) and setting the "gain" for the controller, the
manual brake slider is used to slow just the trailer. The vehicle brake pedal will also
slow down as well as stop the trailer when applied, also via the same connector.
"Gain" values, manual brake outputs, trailer brake types and the trailer connection
status are displayed on the Multi-Information Display (MID).
This vehicle comes equipped with a Toyota Genuine Trailer Brake Controller. Use
of a third-party trailer brake controller along with the Toyota Genuine Trailer Brake
Controller may have unexpected effects on the system.
Toyota does not recommend the use of a thirdparty brake controller with this
vehicle.
CHANGING THE SETTING
(1) Press "
" or "
Information Display (MID).
(2) Press "
" or "
"
".
(3) Press "
" or "
"
".
(4) Select the desired setting and then press "
Refer to the "Owner's Manual" for limitations and more details on this system before
attempting to use it.
" switches and select "
" switches and select "
" switches and select "Trailer Brake Type" and then press
44
Multi-Information Display
(MID)
"*
or "
"*
from the Multi-
1
2
Vehicle Settings", then press
".
*
1
7-in display, *
2
12.3-in display
Advertisement
