Advertisement
Lane Change Assist (LCA)
Lane Change Assist provides steering assistance during a lane change signaled
by the driver while Dynamic Radar Cruise Control and Lane Tracing Assist are
activated, and the vehicle speed is between approximately 55 and 85 mph (90 and
140 km/h). This function should only be used on highways and expressways.
The steering assist operation can be overridden by the steering wheel operation
of the driver. The lane change assist function is not designed to operate when
changing lanes at a junction.
LCA display
Blue arrow and
white line
Not displayed
TURNING LCA ON/OFF
(1) Press "
" or "
Information Display (MID).
(2) Press "
" or "
and hold "
(3) Press "
" or "
then press "
(4) Press "
" to go back to the menu.
OPERATING LCA
If the turn signal lever is held in the first position, the lane change direction will be
displayed and the function will operate.
Refer to the Toyota "Owner's Manual" for additional information on LCA operation,
settings adjustments, limitations, and precautions before attempting to use it.
Steering icon
" switches and select "
" switches and select "
." The setting screen is displayed.
" switches and select "LCA" or "Lane Change Assist" and
" to turn LCA On/Off.
(if equipped)
LCA is operating
Green
Approaching vehicle
detected while LCA is
Gray
operating
Lane line no longer
detected while LCA is
Gray
operating
"*
or "
1
Vehicle Settings" and then press
First position
61
Condition
"*
from the Multi-
2
*
1
2
7-in display, *
12.3-in display
Advertisement
